i2004 set with addon module

[wichie13]

Any issues using the i2000 series sets with add ons on the ucx? I have installed it it flashes on boot up but when I program keys I get nothing on the set....

thanks

Wichie

 

[engenius]

Hi Wicie

Did you add the expansion module in
pbx
extensions ( nortel )
enter ext
module type - ( near bottom )

Owner
Sideline Telephone Service Inc.
Canadian - Reseller

 

[wichie13]

Thanks figured it out tried to program the internal autodials in programming. Ended up doing it on the actual set.

 

[UCXNortel]

You CAN program the internal, external auto dial as well as the Feature Codes on the add on modules in the Edit Nortel Device as along as you have added the Key Expansion Modules are added. I use a 1200 series 12 button KEM and have no issues programming from the UCx GUI.

I hope this helps and have a blessed day!

http://www.ucidirect.com

Stocking Distributor for E-Metrotel

 

[wichie13]

This is working now, I removed it physically from the set and reconnect it and now its fine. It was a physical connection issue.

Thanks