stuckNtcom
Technical User
I am trying (with no luck) to set up an i2004 at home over DSL with static IP. No VPN. Don't care about QoS. Anyone had any luck and would share the steps to config? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
I2004 at home
- Thread starter stuckNtcom
- Start date
- Status
Avaya911PLM
Vendor
You need to have public routable IP addresses on ALL your CS1000 TLAN interfaces, VGMC, MGC, DSP etc. That also includes the other IP phones that you want to talk to.
Basically, all the deviced need to 'see' each other. The remote phone can be behind NAT, but the CS 1000 needs to be visable as well as all the other omponents
--
Fletch
Nortel Emergency Services PLM
Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast
Basically, all the deviced need to 'see' each other. The remote phone can be behind NAT, but the CS 1000 needs to be visable as well as all the other omponents
--
Fletch
Nortel Emergency Services PLM
Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast
- Status
Similar threads
