i2004 add on modules

[Igymann]

Hello,
I am having difficulty adding a add-0n module to my POE I2004 phone.

I usally do this in OTM and just change the AOM setting on it to 2 or 3, but there is no such setting for it on the i2004 phone.

I was also looking for the AOM in the overlay, but did not find it.

Does any one know how to add it?

PS: I am on Release 5


Thanks,
Ignacio

 

[dlesap]

There is no AOM for IP Phone but KEM (Key Expansion Module)
It can be set to 1 or 2 for i2004
It can be set to 1 for i2002

Which of your product is releade 5?

 

[RS528]

You also need at least IP Line 4.0 software and the minimum firmware for your I2002 / I2004 phone is B63.

Ronald

 

[Igymann]

Ok I was able to get the KEM option working for it, but How do i add exentsion to it? Do you have an example.

The phone is an I2004, The PBX is on release 5, and the phones have the latest firmware update.


Thanks,

 

[Igymann]

Any one have an example on how to configure the KEM on the I2004? Any help is appreciated.

Thanks,

 

[dlesap]

First be sure you have the correct hardware for that :
A0540989 or A0540990 or A0555218

Plug the KEM on the right side of i2004 or i2002.
Then LD 11 CHG i2004/i2002 KEM=1
KEYs are mapped from 32 to 55 for the first KEM or 56 to 79 for a second one.

Regards

 

[Igymann]

Great! Thank you! I'll try it.



Thanks,
Ignacio