I refuse to print

[flyingaardvark]

After printing a graphics project with InDesign 3.0.1, it has now refused to print the same project again(a blank page followed by a I successfully print every other project(on my Techtronix Phaser 750) with no problem. I've reinstalled my printer, sent the project to other printers and printed with no problem. I PDF'd the project and it wouldn't print. It does print out: "ERROR: rangecheck" "Offending command: shfill" and STACK: -dictionary-, -savelevel-. Any help would be appreciated.

 

[jmgalvin]

You might try a Save As - so you can't lose the original. When that's done, preflight the thing and see if anything bad pops up. If not, try printing the one you Saved As and preflighted and see what happens. It's wierd that the pdf also would not print. That would tend to indicate that something's very amiss with that document.

Are your other projects also ID or are they from another app? Just trying to figure out if the problem is one particular doc or all ID docs. If you have not printed other ID docs, you might try creating a simple 1 page doc and see what happen when you print that.

Using OSX 10.3.9 on a G4