I possess 2 releases BC9 and BC10 i

[sanremo]

I possess 2 releases BC9 and BC10 in cd rom,I would like how to ican load it in HDU7 ( I receveid 2 HDU7 NEW AND EMPTY).give you tell me the procedure detailed.I watches in dynatext,but I not understand
Your help is very very very very much appricied.
BEST REGARDS.

 

[Avstral]

As I see, there are at least 3 was of doing this.

1. I'd strongly recommend you to contact with local service provider and kindly ask As I see, there are at least 3 was of doing this.

1. I'd strongly recommend you to contact with local MD service provider and kindly ask them to prepare HDU for you.

Otherwise you have a challenge:

2. To do this I, personally, use the chain: PC with SCSI board - hand-made cable from SCSI board to HDU - HDU in MD magazine.
And I use MDDT program with old version 1.0 to communicate with HDU
This is easier for me as this is platform independent set up, which I use for many years.
But main problem here is a cable.

3. If you have alive BC10 with NIU connected to LAN (or connecting a PC directly to a NIU via TCP/IP) you have even easier access to your HDU with MDDT program from SAM toolbox.

If you will choose way 2 or 3, come back & I can supply you with additional info.

Regards