It appears that the logical page margin is around .25 inch from the left edge. I need to print a barcode around 1/8 of an inch from the left edge. Do I use HMI to do this?
If you send the info directly to the printer using
Esc&a0h0v you will get as close to the left and top as you can. Remember to have a capital letter as the end of the
sequence.
I think you can actually get 64 (printable) lines on an 8.5 x 11 but the last line be sure an not send a
CRLF until you have change the line location to above the last line.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.