I need to install HACMP 5.2 on AIX 5.3 - is it possible and supported?

[ogniemi]

I get info thet * bos.rte v=5, r<2 and I have of course 5.3

At least 1 of the following:
| At least 2 of the following:
| | ~ rsct.compat.clients.hacmp 2.3.3.0
| | ~ rsct.compat.basic.hacmp 2.3.3.0
| At least 3 of the following:
| | * rsct.compat.clients.hacmp 2.2.1.30
| | * rsct.compat.basic.hacmp 2.2.1.30
| | * bos.rte v=5, r<2

 

[khalidaaa]

I just attended this course last week Yes it is possible to install HACMP 5.2 on AIX 5.3.

In fact we were having HACMP 5.2 on AIX 5.3 but we upgraded to 5.3 lately.

ps. if you want the filesets need let me know coz i don't have the manuals with me right now

Regards,
Khalid

 

[DukeSSD]

Looks a bit like a toc file, I gave up trying to understand them ages ago.

http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD101347

suggests you can with, possibly, some limitations but the 5.3 link is broken.

I think their intention for the link was:

http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/FLASH10300

Which doesn't look too serious.

Good luck.

 

[ogniemi]

i fixed it installing 3 rsct 2.4.1 filesets from AIX 5.3 installation medias.

 

[khalidaaa]

funny enough i just came across this problem while installing HACMP 5.3 on AIX 5.3 from a NIM master