I need to have an additional aloha terminal installed

[gldnyrs]

Can anyone direct me or send me a link to network wiring diagram for an aloha POS At present I have 4 terminals already installed and operational. having a difficult time finding the termination point for any of these and i plan to install a 5th terminal. I will install the cables myself but need to know the following:
How many cat 5s should I run
how are these connected, is there a main terminal box that I should be looking for?
In simple terms what do I need to have and do to install this new terminal that will be here in 3 weeks? Any help would be sincerely appreciated!!

 

[AlohaRoss]

if you are using puch blocks, do it on the B settings
If you are putting clips the color scheme is
Orange/white Orange green/white Blue Blue/white green Brown/white Brown

Make sure your licenese for 5 terms. There are also setting on each term you need to change as well

AlohaRoss

http://www.needalohahelp.com

 

[gldnyrs]

Thanks for the tip aloha ross,no problem with the licensing but do you have access to a cable network diagram that I can get from you? So I can get an idea as to how they communicate and to make sure I am doing this right?

 

[AlohaRoss]

https://www.dropbox.com/s/ftmzn7dksc2cain/crude aloha.jpg

Here is a very crude picture of how I would setup Aloha.
2 cat5's to each term.

AlohaRoss

http://www.needalohahelp.com

 

[gldnyrs]

Thank you very much for your help Ross I do appreciate your time!