Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
I need some help electricity current on phone systems
- Thread starter Jdlasell
- Start date
Hitechbuzz
Technical User
Hi Jdlasell
If you wish to know the voltages on extensions, they are dependant on the system in use but at pabx end they could be 24v, 40, or 48/50v DC. Ringing anywhere from 60vac to 100vac. At the extension end 6volt off hook to 30vdc on hook. Off hook current drawn 15-20ma. ringing dependent on ringers/bells 10-30ma. Supply voltage & current for system depends on local voltages available power units often fitted to match in. Also how big a system it is go to some of the manufactures web sites and look for technical spec's.
hope this helps.
Cheers
If you wish to know the voltages on extensions, they are dependant on the system in use but at pabx end they could be 24v, 40, or 48/50v DC. Ringing anywhere from 60vac to 100vac. At the extension end 6volt off hook to 30vdc on hook. Off hook current drawn 15-20ma. ringing dependent on ringers/bells 10-30ma. Supply voltage & current for system depends on local voltages available power units often fitted to match in. Also how big a system it is go to some of the manufactures web sites and look for technical spec's.
hope this helps.
Cheers
- Status
Similar threads
- Locked
- Question