Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need help setting up lab environment

Status
Not open for further replies.

chad652

Technical User
Dec 11, 2007
30
US
We have a lab where we stage several voip pbxs at the same time. We have some that are our demos that never leave the lab. I would like to set up vlans and designated switch ports for each pbx.

We have one Cisco 3750 and several HP 2626 switches. I need for all the vlans(pbxs) to be able to access the internet through our single high speed connection. Can anyone please help with a config for the lab? I'm hoping to plug the pbxs into the HP switch and trunk everything back to the 3750 and then send everything out to the internet from there.

I've worked on this for a couple of days but I do not have a strong background in this. Any help is appreciated.

Thanks!
 
Any router on the edge? What type of WAN circuit?

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!
 
We currently have a dsl modem with a built-in router.
 
What questions do you have? What have you accomplished so far?

Are those HP switches layer 2 or 3?

/


tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!
 
Layer 2 2626s. I'll see if I can post configs later.

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top