I have a ROLM 9751 model 10 that ke

[telcomsal]

I have a ROLM 9751 model 10 that keeps loosing the ACD repq every night. The system does not have enhanced ACD reports enabled. This just started happening after a complete power outage. Any idea's

 

[PERRYPJ]

Post your HD here LI HD

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[telcomsal]

Below is the li hd command. Again they do not have enhanced ACD reports enabled. so there is no repq in the hd command.

 

[telcomsal]

Below is the li hd command. Again they do not have enhanced ACD reports enabled. so there is no repq in the hd command.


% LI HD
< Hard disk summary table > Version 1

Maximum LDUs available = 14

Volume names
CI_9005.6.83 01-01-70 00:00 22-07-97 16:58
17 16432
Size = 27 < 7 >
MINI_PV2 01-01-70 00:00 22-07-97 17:07
26265 28088
Size = 3 < 1 >
CNFG_HD_VOL.BU 07-06-12 15:29 07-06-12 15:29
28101 29316
Size = 2 < 1 >
DIAG 01-03-90 12:31 01-03-90 12:31
16456 17063
Size = 1 < 1 >
STF 26-04-94 23:03 26-04-94 23:03
31773 33596
Size = 3 < 1 >
SITE_PV1 01-01-70 00:00 22-07-97 17:19
57273 57880
Size = 1 < 1 >
DISKTOOL 01-01-70 00:00 23-07-97 08:54
57885 59100
Size = 2 < 1 >
BACKUP_CI 01-01-70 00:00 20-01-99 10:53
42670 57261 60333 62156
Size = 27 < 7 >
COPY_BACKUP.TEMP 13-07-04 10:01 20-01-09 09:33
33609 35432
Size = 3 < 1 >
SYSTEM_INFO 01-01-70 00:00 26-04-94 19:16
19516 20123
Size = 1 < 1 >
DX_DFE 01-01-70 00:00 26-04-94 19:19
20128 20735
Size = 1 < 1 >
TRAIL 12-12-90 07:44 12-12-90 07:44
38998 41429
Size = 4 < 1 > *** PERMANENT VOLUME ***
CDR 12-12-90 07:49 12-12-90 07:49
41446 42661
Size = 2 < 1 >
CNFG_9005.6.83 13-07-12 14:49 13-07-12 14:49
29342 31165
Size = 3 < 1 >
CNFG_0713 13-07-04 10:01 13-07-04 10:01
35445 37268
Size = 3 < 1 >
CNFG_BU 13-07-04 10:01 13-07-12 14:55
17068 18891
Size = 3 < 1 >

 

[PERRYPJ]

THERE HAS TO BE REPQ ON THE HD IN ORDER FOR THE ACD REPQ TO SURVIVE A RELOAD, IT SOUNDS LIKE YOUR SWITCH IS RELOADING INSTEAD OF RESTARTING AT MIDNIGHT

OLD ROLMEN WORKING ON NORTELS AND AVAYA