I have a pc (amd 800mhz) that has a

[Cyaankali]

I have a pc (amd 800mhz) that has a big problem. When it boots he only shows the specifications of the grafics card and the the SCREEN goes non-active mode.The screen is not the probem because i've tested it with another screen. Also IF he makes it trough the boot sequence he just stops after detecting his drives. All connectors are in place.

Does anyone have a solutions??

Thnx

 

[CitrixEngineer]

Have you tried going into the BIOS and setting it to factory default, then auto-detecting the hard disk(s)? CitrixEngineer@yahoo.co.uk

 

[Cyaankali]

I can't get in the screen goes down before i can enter the bios

 

[Thelemac]

Try holding insert while you boot. Or you could clear the CMOS (take the battery out of the mobo while it's unplugged, or short the contacts that should be labeled near the battery).

 

[Cyaankali]

Thnx for all your help!! I found the problem, the memory was the problem! Problem solved
thnx everybody