I have a Norstar 8X24 with DR3 Soft 1

[tarzan41311]

I have a Norstar 8X24 with DR3 Software. I need to know what are the other cards I need to get this system ready. Evidently the DR3 module plugs into another module which plugs into the KSU. What is this module called and is anymore needed. I have not used the 8X24 and I did not get it from someone that can advise me. Thanks for any help. Richard

 

[exsmogger]

If all you have is the ROM cartridge (the part labeled DR3) then you also need what's called a data cartridge. The DR3 plugs into the data cartridge, and the data cartridge plugs into the 824 near the top middle of the cabinet. You should then have a functioning 8x24 system. You also need 25-pair amphenol cables to connect to the stations and lines. Top amphenol = lines, bottom amphenol = stations. You will need either a 7310 or 7324 with which to program the system. Brian Cox
J & J Communications

http://www.jandjcommunications.com

brian@jandjcommunications.com