I have a new number 4644 I can't call from outside???

[bzakk]

I have 38XX already in the callmanager. I want to add the first 4XXX number. I built the phone but I can't get the Call Manager to accept the call. Do I have to tell it That 4XXX is a new number. If so how?????

 

[jeter]

Can you call internally to the 4xxx?

How many digits are you receiving on the incoming PRI?

If you are using a PRI you can debug (debug isdn q931).
Place a call in on the new 4xxx if you have a DID setup.

You may have to setup a translation!!






Spc NVARNG
Tek-TIP Member 19,650

 

[iptuser]

What partitons have you allocated to the 4xxx range- is they same as 38xx, Do you own the 4xxx at the Telco

 

[bzakk]

yes I can dial it internally, I have it in the default partition which is the same as the 38XX. These numbers are coming in over a SIP trunk to a Nortel CS1000. The CS1000 is sending the 4XXX numbers the exact same as the 38XX. I don't know how to setup a translation. I have a phone at my desk that has 3850 on it and it works fine. If I chgange the number to 4466 it will not work, but I can dial it from the inside.