Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I have a 2400ics and I need to forward phones out to cell phones. 1

Status
Not open for further replies.

mickyspring

Technical User
Oct 4, 2013
57
US
I have a 2400ics and the voice mail crashed so the company are wanting to forward desk phones to cell phones, and also need to set up speed dials so the attendant can just dial that speed call number instead of the whole number.
 
Just set the desk phone to call forward all to the outside number. The attandant can then transfer to the desk phone. The forwarding will take care of the rest.
 
To automatically do it you just set call forward to 91-xxx-xxx-xxxx (cell phone number). To make a speed dial for your attendant, you go to ASPD command and create a three digit code (i.e. 111) to equal the same number as above (91-xxx-xxx-xxxx). Your attendant would dial *9111 and it would go to the cell phone number you programmed. I am assuming here that 9 is what you dial to get an outside line from your system.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top