Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
I can't initiate follow-me
- Thread starter XCatalin
- Start date
Hi,
If you want you can make a trace according to the procedure below. Mail me the logfile and I´ll have a look at the QSIG-signalling MD110-BP250.
ficri@netlane.com
STUNI:LIM=1,UNIT=SLP60; (Supposing the QSIG route is in LIM=1 else change to the correct LIM)
STTSS:TRI=1,SIZE=300;
STTSI:TRI=1;
EXECUTE THE FOLLOW ME PROCEDURE
STTSE:TRI=1;
START A LOGFILE
STRAP:TRI=1;
CLOSE THE LOGFILE
If you want you can make a trace according to the procedure below. Mail me the logfile and I´ll have a look at the QSIG-signalling MD110-BP250.
ficri@netlane.com
STUNI:LIM=1,UNIT=SLP60; (Supposing the QSIG route is in LIM=1 else change to the correct LIM)
STTSS:TRI=1,SIZE=300;
STTSI:TRI=1;
EXECUTE THE FOLLOW ME PROCEDURE
STTSE:TRI=1;
START A LOGFILE
STRAP:TRI=1;
CLOSE THE LOGFILE
- Status
Similar threads
