MARCELJR38
Vendor
I connected a printer on the flash , I do al the codes to print report 1, 2, 3 ect.. and the printer does not go... What am I missing? marcel.richardjr@cnatelecom.com
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
I can I have reports on paper on a Flash 1
- Thread starter MARCELJR38
- Start date
- Status
-
1
- #2
The port on the Flash is serial output, so if you're using a parallel printer it won't work without a serial-parallel converter. Output on the serial port is 1200 baud, 8-N-1. You can also dump your reports into Hyperterminal and then print them out. Brian Cox
J & J Communications
brian@jandjcommunications.com
If you find this post helpful please mark it as such.
J & J Communications
brian@jandjcommunications.com
If you find this post helpful please mark it as such.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
