I am trying to remove the second 'o

[iagogohome]

I am trying to remove the second 'outside' route

firewall(config)# show route
outside 0.0.0.0 0.0.0.0 63.27.159.113 xx1 OTHER static
outside XX.27.159.112 255.255.255.240 .27.159.126 1 CONNECT static
inside 192.168.100.0 255.255.255.0 192.168.100.100 1 CONNECT static

mckenna(config)# no route outside xx.27.159.112 255.255.255.240 xx.27.159.126 1
Route already exists

Very frustrating. Could someone give me a hand...
in addition to posting, mind emailing pix@bigdon.com. Sorry if this is a basic question...

 

[sgamer]

The PIX automatically adds that route to identify that the network 63.27.159.112/28 exists on the outside interface. You cannot delete it.

Check this link:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/mr.htm#xtocid19

Excerpts:

The clear route (or no route) command does not remove route command statements that contain the CONNECT keyword.

The routing table automatically specifies the IP address of a PIX Firewall interface in the route command. Once you enter the IP address for each interface, PIX Firewall creates a route statement entry that is not deleted when you use the clear route command.

The CONNECT identifier is assigned to an interface's local network and the interface IP address, which is in the IP local subnet. PIX Firewall will ARP for the destination address. The CONNECT identifier cannot be removed, but changes when you change the IP address on the interface.