I’m trying to connect to my PIX via

[br0ck]

I’m trying to connect to my PIX via PDM
I entered PIX as the username and the enable password no access
I entered the host name of the PIX and the enable password no access
I entered the same info as above with the monitor password and yet no access
What am I doing wrong?

I can access the CLI with no problems and is my preferred method but I want to see the PDM basically to better understand it
I did at one point have access to it but now I cannot
HELP.

Brock D. Mowry,MCP
Hardware Specialist
iNECTA LLC
Miami, Fl

 

[yizhar]

HI.

Use empty blank user name, and the enable password.

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[cygnusman]

brock,

Are you using Internet Explorer 6 with SP1?? If so it could be this. I just installed SP1 and 'lost' access to PDM from IE.

Cisco are looking into this.

Here's a workaround.

Launch IE - go to any site, minimise IE. Launch IE (another instance) and enter PIX IP (remember

https://).

Should be OK if same problem as me.

Regards.