HV.Select Daisy Panasonic NS700

[kevwww]

Hi All

Am Having issues setting up sip on an Panasonic NS700 using daisy sip trunks has any one got any screen shots or a working backup

Thanks

 

[CMUK]

Hello,
you typically won't get anyone sharing backups on the site due to obvious security reasons
Do you have a method I can send you a guide or RA ?
I have a kit with the exact set up you have

Calum M
ACSS

 

[kevwww]

Thanks for getting in touch Calum I don't have remote access as yet. But if you can forward me a setup guide that word be ideal.
Thanks again.

 

[CMUK]

Hello,
I have put together a very rough guide - I am assuming your way around an NS700 and have done correct port forwards etc,
The guide really just explains the SIP Gateway card settings I have obliviously had to censor sensitive data however if you are still struggling let me know
Thanks

Calum M
ACSS

 

[kevwww]

Great much appreciated. Yes Ive setup SIP with gamma many times.

 

[CMUK]

Yup well I don't really like the HV Select SIPs, my firm no longer use them after briefly moving to them from Gamma, I have found you can't send out a number not on the account unlike gamma and I have had the HV Select SIPs on both an Avaya IP Office and a Unify X3 and they take around 20-30 seconds to dial out, I do not believe its the PBX config - we eventually moved back to Gamma, seemed fine on Panasonic though..... We just use their HV Select hosted phones now and moved SIPs back to Gamma
Good luck!

Calum M
ACSS