Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Huntgroup - User Voicemail
- Thread starter fordhouse
- Start date
Cant be done with VM Lite,Call to a hunt group will always go to hunt group mailbox unless using VM Pro where you can specify a mailbox for the message to be left using the leave mail action
Soopa Doopa Intergalactic IP Office installation mechanic and configuration corruptor from way back.
Soopa Doopa Intergalactic IP Office installation mechanic and configuration corruptor from way back.
can be done with a bit of SNEAKY programming
creat a sequential(hunt) group as an over flow group
creat a short code simmilar to
SC 666
Number "#<user name>"
Feature Voicemail collect
creat a dummy user & set forware unconditional to 666
enable forward huntgroup calls
add this user to the overflow group
calls will now ring both users in the main group
hit the oiverflow group & divert imidiatley to the user mailbox
creat a sequential(hunt) group as an over flow group
creat a short code simmilar to
SC 666
Number "#<user name>"
Feature Voicemail collect
creat a dummy user & set forware unconditional to 666
enable forward huntgroup calls
add this user to the overflow group
calls will now ring both users in the main group
hit the oiverflow group & divert imidiatley to the user mailbox
- Thread starter
- #4
OK I will try to take it step by step
1) create the following short code
Short Code: 666
Numebr: "#<Mailbox Name>" - # means leave mail
Feature: VoicemailCollect
2 Create a pahntom user (a user without a physical extn., set forward unconditional to 666, enable forward hunt group calls. A call to the phantom user will now take a msg for the mailbox
3)creat a new group - set to hunt & add the pahntom usere
4) in your main group add the new group into the overflow group list
calls will ring the group, when they overflow they will call the phantom user, which is on divert & will route dircetct to the specified mailbox.
As I said it is SNEAKY programming but it works!
If you are still stuck I can creat a sample Cfg for you to download.
1) create the following short code
Short Code: 666
Numebr: "#<Mailbox Name>" - # means leave mail
Feature: VoicemailCollect
2 Create a pahntom user (a user without a physical extn., set forward unconditional to 666, enable forward hunt group calls. A call to the phantom user will now take a msg for the mailbox
3)creat a new group - set to hunt & add the pahntom usere
4) in your main group add the new group into the overflow group list
calls will ring the group, when they overflow they will call the phantom user, which is on divert & will route dircetct to the specified mailbox.
As I said it is SNEAKY programming but it works!
If you are still stuck I can creat a sample Cfg for you to download.
- Status