Hunt groups

[AndyRothgen]

Hi,

I've been following this guide -

http://pbxbook.com/meridian/admin/gpht.html

And have got as far as creating the list -

>ld 18
SCL000
MEM AVAIL: (U/P): 90647580 USED U P: 13256956 365285 TOT: 104269821
DISK SPACE NEEDED: 767 KBYTES
REQ new
TYPE ght
LSNO
SCH440
LSNO x
SCH030
LSNO
SCH440
LSNO 12
CUST 0
DNSZ 4
SIZE 10
WRT (ADDS: MEM: 17 DISK: 0.0)
STOR 0 8819
WRT
STOR 1 8722
WRT
STOR 2 8989
WRT
STOR

MEM AVAIL: (U/P): 90647536 USED U P: 13256974 365311 TOT: 104269821
DISK SPACE NEEDED: 767 KBYTES
REQ ***

I hit an issue trying to do the bit in LD57

>ld 57
FFC000
MEM AVAIL: (U/P): 90647536 USED U P: 13256974 365311 TOT: 104269821
DISK SPACE NEEDED: 767 KBYTES
REQ chg
TYPE ffc
CUST 0
FFCT
CODE pldn
PLDN 12


SCH8893

PLDN 8819


SCH8893

PLDN 8722


SCH8893

PLDN 8989


SCH8893

PLDN
CODE pldn
PLDN
CODE

MEM AVAIL: (U/P): 90647536 USED U P: 13256974 365311 TOT: 104269821
DISK SPACE NEEDED: 767 KBYTES
REQ chg
TYPE ffc
CUST 0
FFCT
CODE pldn
PLDN 12


SCH8893

PLDN

I thought the PLDN would be the list number from the first bit but that doesn't work & nor does any of the DNs in the list. What do I put?

 

[bignose21]

PLDN is the Pilot number so it is a spare DN that is called to access the members in GHT 12 that you have created

eg pldn 8000 set it to RRB or LIN depending on Hunt type required and set the LSNO to 12

call 8000
call steps around extensions 8819 8722 & 8989

 

[AndyRothgen]

Can't I do it so they ring one of the existing numbers?

 

[bignose21]

that would not be a hunt group. more of a call forward on busy/No-Answer to do next extension. You can do this by altering the forwards on the sets, down side is they will do this for all calls so no personal voicemail etc.

example all need CLS HTA FNA

Extension 8819
FDN & HUNT 8722

Extension 8722
FDN & HUNT 8989

Extension 8989
FDN & HUNT 8819

 

[Firebird Scrambler]

My guess is that "12" is your SPRE code!. It's found in LD 21 under FTR_DATA

i.e.
>LD 21
REQ: PRT
TYPE: FTR
CUST

FTR_DATA
**DAPC**PREFIX TABLE NO: 00 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 00 0
PRIV*
E163* 00 0
TELX*
X121*
NATL*

**DAPC**PREFIX TABLE NO: 01 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 900 90
PRIV*
E163* 900 90
TELX*
X121*
NATL*

OPT ABDA AHA EBIN BIXA BLA BOHA CFF CFRA
COP CPA CTA DBD DNCA DNX DSX DRE
DSTD FACD HTU HVD XBL IC1 IDP XLF
IHD ITG FKA LOA LRA MCI MCTD CUI
MWUD NCA PCMD PSA PVCA RECA REA RNA
ROR RTD ROX SBD SDDE SIAD SLD SYA
THPD TTAA VOBA CWRD HLPD HRLD
CXOD BWTD
DGRP 10
IRNG YES
PKND 2
DNDL NO
SPRE 12
PREO 0
BPSS NO
SRCD 1234
EEST YES
DTMF NO
EESD NO
TTBL 0
MUS NO
HCC NO
ALDN
RECD NO
PORT 0
TFDR NO
RPA NO
MCDC NO
NAUT NO
IDEF NO
MTAR NO
LEND NO
MSCD NO
CONF_DSP
CNFFIELD NO
CNF_NAME CONF
INTFIELD NO
INT_NAME I
EXTFIELD NO
EXT_NAME E
BSFE NO
ASPCT 010
FXS NO
DFLT_LANG ENG
STS_MSG
MSG01 Please leave message
MSG02 Back to work
MSG03 In a meeting
MSG04 On a conference call
MSG05 At lunch
MSG06 Busy call
MSG07 Out of the office today
MSG08 On a business trip
MSG09 Project deadline today
MSG10 Will reply after
VO_ALO NO
PCA ON
TPDN
BFS_CFW YES

Go into LD 15 and change it. It's an old setting for analogue sets that was pulse dialing and you can change the number to a 4 digit one that is spare.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[AndyRothgen]

Thanks Bignose, looks like I'll have to talk to the users. I didn't use forwards etc as they have voicemail setup already.

Firebird, I made up the '12' as I thought it was just a unique name for the list, I didn't know it meant anything.