hunt group with destinations as external stations

[Vzorak]

Hi friends,
I am trying to do a hunt group and it works OK when all destinations are internal stations.

But I need to have several destinations which are external stations, p.e mobile phones and in this case it doesn't works.
ADD-WABE:CD=*550,DAR=HUNT,CHECK=N;
ADD-SA:TYPE=VCE,CD=*550,STNO=0123456789&0234567891&0345678912,STYPE=CYC,CQMAX=0,NAME="EXTERNAL_TEXT",FNA=Y,EXECCFW=Y,OVFLCYCL=Y;

It rings the first call but not is able to call the second one. Please, could someone help me?
Thanks in advance and regards

 

[sbcsu]

If a hunt group is setup with external stations then when the call goes to the first external station it has no way of knowing if the call has been answered or not as it is external to the system.
If the external station that is due for the call is out of coverage or out of service the call will still go to that station.

 

[Vzorak]

so, is it not possible to do with hunt group or anyway else?
thanks for your help

 

[sbcsu]

It will always work correctly if the mobile phones are in coverage and the users answer the calls.

And also you could overflow the hunt group to a mobile if required.

 

[Vzorak]

Thanks for your response
But i think it is not going to work because i have only external stations (fix and mobile phones) and i want the call goes to the first one, then the second one, third one... (in CYC) until one station answers the call.

Also, I was trying to do it calling to internal stations (as FLOAT in sbcsu) but it doesn't works.
ADD-SA:TYPE=VCE,CD=*550,STNO=1234&1235&1236,STYPE=CYC,CQMAX=0,NAME="EXTERNAL_TEXT",FNA=Y,EXECCFW=Y,OVFLCYCL=Y;
ADD-ACTDA:TYPE=STN,STNO=1234,FEATCD=FWD,CFVAR=STATIONV,DTYPE=CFU,ITYPE=GEN,SI=VCE,DESTNO=0123456789;
ADD-ACTDA:TYPE=STN,STNO=1235,FEATCD=FWD,CFVAR=STATIONV,DTYPE=CFU,ITYPE=GEN,SI=VCE,DESTNO=0987654321;
ADD-ACTDA:TYPE=STN,STNO=1236,FEATCD=FWD,CFVAR=STATIONV,DTYPE=CFU,ITYPE=GEN,SI=VCE,DESTNO=0135792468;
i thought may be changing any parameter it will be possible...

 

[sbcsu]

The problem is that when the call is sent to the mobile phone then the call has left the system and cannot be reclaimed back.
At the end of the day you need users to answer the phone, if the calls are not answered then there is no point in sending the calls out to them.