Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HUNT GROUP REVIEW
- Thread starter s8m
- Start date
telecomtekperson
Vendor
The only way is to page through proggramming.
BUT, If you have an ACS, you can use the software to go in and do it that way. But again...IF you have an ACS...
BUT, If you have an ACS, you can use the software to go in and do it that way. But again...IF you have an ACS...
dagwoodsystems
Programmer
A detailed step-by-step procedure for assigning lines to hunt groups (aka Group Call Distribution) can be found on page 4-39 (PDF page number 135) in
There's nothing special about a D8W-87 cord. A similar cable (such as an 8-wire straight-through ethernet patch cord) will substitute.
A Google search for "355A Adapter" reveals several sources for this product. Specifically, you will want the 355AF or 355BF version of the adapter.
There's nothing special about a D8W-87 cord. A similar cable (such as an 8-wire straight-through ethernet patch cord) will substitute.
A Google search for "355A Adapter" reveals several sources for this product. Specifically, you will want the 355AF or 355BF version of the adapter.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
