Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hunt group red flag

Status
Not open for further replies.

MalibuMike

Programmer
Mar 12, 2002
12
US
I am new to this. I used an existing working callpickup group as a guide and created a new one called "tool room". I then entered the three extensions and verified that all the exact boxes were checked as they are in the working one.
It does not work. When I look at the hunt groups, the "tool room" one has a small red flag next to it and the logo is smaller. I assume there is a reason for this. Any ideas?
thanks
Mike
 
This icon means that you have queuing enabled. Just click over to that tab and unclick it. Mind you, this is a hunt group. Call pickup functioality is done through short codes or button programming.
 
Red flag at the icon means that queing is enabled for that group.
Have you created the correct feature button or shortcode for to pickup calls for that group or groupmembers?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top