Hunt Group LD 57 Cust 0 2

[AugieDawgie]

I'm trying to setup a hunt group on an Opt. 11C. The LD 18 part went fine; however now when I go to LD 57 and enter 0 for CUST, I get the following error:

SCH0896 No other user is allowed for an existing high speed link

if I don't enter anything, I get a "null" response is not allowed.

 

[acewarlock]

What are you trying to do in LD 57???

 

[AugieDawgie]

Attaching a Pilot DN that when the person dials that extension it runs through the hunt group then goes to its voicemail if no answer; i.e.,

Pilot dn 5188
Rings, then goes to extension 6677 then 6898 then back to 5188's voicemail if unanswered

REQ CHG
Type FFC
CUST 0
CODE PLDN
PLDN (unique on Meridian)
USE GPHT
LSNO
HTYP
CFWI
YES
MQUE
0
1

 

[johnpoole]

use the new command the 1st time in 57..

john poole
bellsouth business
columbia,sc

 

[AugieDawgie]

John,

The setup worked; however do I need to do anything else with the pilot dn? After I built it, I got the following error message:

SCH 8987 Cust 0

and the extension, 5148 is ringing busy.


Thanks for your help, it's greatly appreciated.

 

[Pudge99]

Try removing the LD-18 portion and building the LD-57 data first. I remember something about a cart before the horse..........