Hunt group/Closet Set/IP trunks/Stuck!!!

[nooop]

OK, Two BCM50's 2.0, with MCDN and 2 VOIP trunks accross an MPLS to the second site. 3 digit dialing works fine 1 way, I am working on the other direction and almost have it fixed. However the larger issue is to route a Hunt group member to the second BCM. I have a closet set forwarded to the private recieved number and it works fine if you dial the local extension, but the hunt group totally ignores that set. I have it on rotary. We need to route some calls to the second site to load balance on 1 of our Hunt groups. The HG is accessed via Auto Attendant using a CCR tree.

Any work arounds? Any tricks that can do this?

 

[senk1s]

- use a remote IP Phone
- use overflow of the hunt group to offsite number

 

[DBrewsky]

Hunt Group members will not follow any forwarding, and thus will not route the way you are hoping it will. The remote member of the hunt group needs to be tied to the main system somehow, thats why the previous post is there.. Remember, the Norstar/BCM product line is only a key system and not a full fledged PBX..

Sorry we couldn't be more helpful.


--DBrewsky