Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

http://wiki.emetrotel.org/pages/viewpage.action?pa... 1

Status
Not open for further replies.

ORPG

MIS
Jul 17, 2014
129
US
UCXGUY...please what is the complete link to this site; I am losing calls on my UXC50 and according to your previous post, it is a SIP session timer issue.
 
You are probably looking for configuration notes about Grandstream gateways that need the session-timers=refuse added to the trunk configuration.

If that's the case, set the UCx Peer Details for the corresponding SIP trunk as follows:

[pre]host=ip address of the gateway
type=peer
dtmfmode=rfc2833
insecure=port
context=from-trunk
qualify=yes
session-timers=refuse[/pre]
 
Thanks UCXGuy. Your are always the "one to go to"!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top