HPLTRPL1.EXE

[teddysherri]

Hello

I have a Designjet 500 hooked up to and shared from a windows 98 pc. On one of the win 2k pc's that use it i get the following error HPLTRPL1.EXE generated errors and failed to start.

I have checked the HP website but they only have an article regarding XP has anyone had this problem with win 2k?

Cheers

 

[zaznet]

First off check the XP article, it can be the same problem. Windows NT 4 was used as a base to creaet Windows 2000 and Windows 2000 was then used to create Widnows XP.

I would suggest (without looking at HP's KB) that you want to try re-installing the drivers on the problem workstation. To do this I would delete the existing printer, and install it as a new printer. The reason I would do it this way is to clear any problem settings (optional accessories for example).

Good Luck

Nathan aka: zaz (zaznet)
zaz@zaz.net

http://www.zaz.net/