Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HP5000 dn part number and help.
- Thread starter SPinder1
- Start date
Check up on the pickup rollertype here and click the the small camera images for a clear mounting diagram.
- Moderator
- #3
As far as changing the roller, it should be a simple task.
I just went and looked at the 5000 we have here. You'll see two white wheels, and a D-shaped pickup roller. The D-shaped roller is what you want to change.
To change it, you'll see a little clip on the right white wheel; squeeze the little clip towards the wheel, and slide it over to the right. The D-roller will now slide out to the right, and you can replace it. Make sure the white roller locks back into place (you'll hear a little click), and you're good to go!
Just my $.02
"In order to start solving a problem, one must first identify it's owner." --Me
--Greg
I just went and looked at the 5000 we have here. You'll see two white wheels, and a D-shaped pickup roller. The D-shaped roller is what you want to change.
To change it, you'll see a little clip on the right white wheel; squeeze the little clip towards the wheel, and slide it over to the right. The D-roller will now slide out to the right, and you can replace it. Make sure the white roller locks back into place (you'll hear a little click), and you're good to go!
Just my $.02
"In order to start solving a problem, one must first identify it's owner." --Me
--Greg
- Status
