HP Server from HP to be deployed as IPOSE

[BrianCosta]

Hi ,,

I have a customer have the following Server from HP:

HP SERVER OFFER

HPE ProLiant ML30
Gen10 Intel Xeon E-2224 Quad-Core (3.40GHz 8MB)
16GB (2 x 8GB) DDR4 2666V-E UDIMM
4 x Non-Hot Plug 3.5in
1 X 1TB 7.2K RPM SATA
Large Form Factor
Smart Array S100i
No Optical
350W

Ask me if this is OK for Server Edition implementation? I need your opinion Experts.

Thanks

 

[nnaarrnn]

I'd never allow anything to run on 1 hard drive, but if it meets Avaya's specs, you should be fine.

 

[teletechman]

you also need to know if it is a software raid or hardware raid in the server even though you only have 1 hard drive. Could not load to a software raid when we tried, and Avaya could not figure it out.
Mike

 

[nnaarrnn]

It's software RAID, "Smart Array S100i" The S in the model is for Software....

But with only 1 drive, RAID is a moot point.

 

[teletechman]

Might be different as we were using a Dell server when we tried this. The only thing Avaya suggested was that the software RAID was the problem. Had to load VMWare then the app server for this.
Mike

 

[jamie77]

Given that the amount of users etc is a key factor to spec, its impossible for anybody to say.

Avaya have 2 servers they supply, depending on size of deployment.

I wouldn't run it directly on hardware, backing up is much simpler if run on a hypervisor.

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer

 

[ipohead]

I'm not sure if this helps Primary and secondary servers