CLOSEyetFAR
Technical User
I have had this hp psc 750 for about 12 months and it has worked without fault until now.
I recently had to re format my machine on which im running win 98. The steps for installation are as follows;
1) load software.
2) reset machine.
3) connect power/USB.
4) press printer power button.
5) Registration screen loads automatically as a result of step 4.
step 5 is where my problem is, once i have turned on the printer the registration app does not load, preventing me from completing the installation.
Does anyone know of a way to open the registration manually or some other way of getting around this issue?
any help would be greatly appreciated
I recently had to re format my machine on which im running win 98. The steps for installation are as follows;
1) load software.
2) reset machine.
3) connect power/USB.
4) press printer power button.
5) Registration screen loads automatically as a result of step 4.
step 5 is where my problem is, once i have turned on the printer the registration app does not load, preventing me from completing the installation.
Does anyone know of a way to open the registration manually or some other way of getting around this issue?
any help would be greatly appreciated
