Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP printer and scanner not workin on the same system

Status
Not open for further replies.

dfailure

Technical User
Feb 26, 2008
1
AU
I have a system that has three HP products intall on it

1. HP LaserJet 2015
2. HP ColorLaserJet 2605
3. HP Scanner 5550c.

Now the problem is all of them are connected via USB port.

The driver of all of these products are installed perfectly and the system shows the devices in the ready state without any problems.

As we start to take print outs None of the printers are givng printing as well as even the scanner is not scanning .

but when i remove the USB cable of one of any devices given above it starts to work fine.The USB cables of all the three devices are in good working state

But when i plug the unpluged USB of the device it shows USB unrecognized. dont know wats heppening but all the three devices are working abnormally.
Plz help!!
thankyou
 
dfailure said:
when i remove the USB cable of one of any devices given above it starts to work fine

Please explain this statement in a little more detail.

Tony

Users helping Users...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top