Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP ML350 G6 cannot connect to USB3 PCI-e card

Status
Not open for further replies.
TrubbleMaker

TrubbleMaker

MIS
Jul 8, 2011
2
0
0
AU
Hi guys

We recently installed a ML350G6 with Windows 2008 R2 x64 and thought we 'matched' it with a HP USB3.0 Superspeed PCI-e card (BM867AA) and subsequently found out that that particular card is not compatible with the ML350 G6. I haven't been able to ascertain if it is a driver, hardware or firmware issue.

So my questions are:

a. Is there a way to MAKE that card compatible with the ML350 G6? or
b. Is there another card (preferably available in Australia) that will work with the ML350 G6? or
c. Do I just need to give up and go back to USB2.0?

Thanks muchly

Charlton
 
Status
Not open for further replies.

Similar threads

olorin0958
  • Locked
  • Question
Unable to source hp part 148757-001
Replies
2
Views
71
olorin0958
olorin0958
Fudgitsu4854
  • Locked
  • Question
VMware essentials vs essentials plus
Replies
1
Views
62
ADB100
ADB100
DrB0b
  • Locked
  • Question
Moving possibly to AWS 1
Replies
3
Views
79
SamBones
SamBones
kyle1915
  • Locked
  • Question
x3850 x5 7143 - run display from pci-e graphics card
Replies
1
Views
56
goombawaho
goombawaho
DTGMI
  • Locked
  • Question
PCI Light Path Diag Alarm 2:6 - Can't Clear it!
Replies
1
Views
53
DTGMI
DTGMI

Part and Inventory Search

Sponsor

Back
Top