Are there any other Novell 4.11 HP Netserver LH4 & Pro users out there?<br>
<br>
I've been having trouble getting SMP to run on the new hardware the department finally shelled out some cash for. Both servers are running 4.11 with service pack 5b and the common tcp/ip update 5 [TCPIP.NLM (v4.01G)]. The LH4 has the odi 3.3g update. They are both using three 3-com 3c980 server NIC's (interrupts of 5, 10 and 11 manually set in BIOS) with the latest nic drivers and the latest BIOS updates for the servers.<br>
<br>
The LH4 is getting spurious hardware interrupt messages on int 11 at Netware startup and abending at "server 03" when under high utilization (TID'S 2920064 and 2928338), while the LH Pro is getting no error messages on Netware startup but also abends with the SMP nlm listed as the running module at the time. Note: The LH Pro is also running GroupWise 5.2 (TIDS 2945311 and 2942151), but the same configuration worked fine on the older LS2 Netserver.<br>
<br>
I intend on going to the 6b service pack soon, but again SMP worked before the new hardware. The INT 11 message on the LH4 leads me to beleive that disabling the NIC using 11 might fix the problem.<br>
<br>
Any ideas?
<br>
I've been having trouble getting SMP to run on the new hardware the department finally shelled out some cash for. Both servers are running 4.11 with service pack 5b and the common tcp/ip update 5 [TCPIP.NLM (v4.01G)]. The LH4 has the odi 3.3g update. They are both using three 3-com 3c980 server NIC's (interrupts of 5, 10 and 11 manually set in BIOS) with the latest nic drivers and the latest BIOS updates for the servers.<br>
<br>
The LH4 is getting spurious hardware interrupt messages on int 11 at Netware startup and abending at "server 03" when under high utilization (TID'S 2920064 and 2928338), while the LH Pro is getting no error messages on Netware startup but also abends with the SMP nlm listed as the running module at the time. Note: The LH Pro is also running GroupWise 5.2 (TIDS 2945311 and 2942151), but the same configuration worked fine on the older LS2 Netserver.<br>
<br>
I intend on going to the 6b service pack soon, but again SMP worked before the new hardware. The INT 11 message on the LH4 leads me to beleive that disabling the NIC using 11 might fix the problem.<br>
<br>
Any ideas?