brady12345
MIS
How do you connect a laptop directly to the 2200dtn printer in order to configure the TCP/IP information?
Thanks in advance,
Brady
Thanks in advance,
Brady
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HP Laserjet 2200dtn
- Thread starter brady12345
- Start date
- Status
- Moderator
- #2
You would either use a hub or a crossover cable.
Print out a configuration page (hold reset and press the go button), and it will tell you what the current IP address is.
Set your laptop on an IP in the same class, telnet in, and make the changes.
Remember, once you commit the changes, you will be disconnected (if you change the IP address)
Just my 2¢
-Cole's Law: Shredded cabbage
--Greg
Print out a configuration page (hold reset and press the go button), and it will tell you what the current IP address is.
Set your laptop on an IP in the same class, telnet in, and make the changes.
Remember, once you commit the changes, you will be disconnected (if you change the IP address)
Just my 2¢
-Cole's Law: Shredded cabbage
--Greg
- Thread starter
- #3
- Moderator
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question