Hello, I have recently installed 36 of these setups and the flat panel power option is giving me a problem. I have the power scheme set to shut of the monitor @ 20 minutes and go to screensaver @ 30 minutes. Some of these monitors go to sleep as they should, others go to the screen saver, and others stay up at the log on screen. Please advise.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HP L1940 & HP 5150 Power Scheme Problem
- Thread starter NPursuit
- Start date
I'd approach the problem this way:
1. Check power saving settings in bios first. You might have different bios versions on machines of the same model.
2. Do away with screen savers on all of 'em.
3. Set the monitors to shut down at your desired interval of 20 minutes using the control panel app.
Skip
1. Check power saving settings in bios first. You might have different bios versions on machines of the same model.
2. Do away with screen savers on all of 'em.
3. Set the monitors to shut down at your desired interval of 20 minutes using the control panel app.
Skip
- Status