HP Jetdirect 500x

[k3lvin]

I have a new PC that only has USB ports and it needs to be connected to a label pritner which uses paralel ports. I also have a HP Jetdirect 500x box. How would I configure the Jetdirect box? Is there some sort of HP admin tool so I can give it an IP address?

Thanks

 

[hpwizzard]

Please check this doc. :

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/bpj06151/bpj06151.pdf

It contains info on how to setup the box and reset it if needed. If you have the original CD that came with the box, you can use the utility called JetAdmin for configuring the card.

 

[k3lvin]

Hey I worked it out in the end I used the JetAdmin tool from HP. Thanks a lot