I am combining two old HP E 60 PII 450 netservers. The part number of the HP SCSI drive is D4911-6300 and the current firmware is 5541. I am trying to set up the SCSI ID's and have no idea what jumpers to use for the 2nd drive. Also, are SCSI jumper connectors the same size as IDE connectors. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HP E 60 Netserver 9.1GB HDD, Ultra 2 Wide
- Thread starter Yooper46
- Start date
Similar threads
