My printer is not responding, when the power is "on" the light in the switch would just blink forever and if the printer's hatch is opened, the moving thing where the ink is located doesnt move in to the center, where it should be.
Disconnect from computer and unplug electrical for 5 mins. Reconnect electrical and see if it returns to normal. If not disconnect again and check for obvious problems such as paper jam. Lift cover and see if you can gently pull the print head to the center and remove print cartridges. Connect power and see if it returns to normal. If still nothing I'd say the printer cover switch isn't functioning properly.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.