HP 2600 Routing Voice and Data

[BobTurner]

Here is my senario. I have a Mitel 3300 ICP with an IP 142.28.111.123 it is on vlan 200. This will be for Voice. I nead to route it to vlan 100 to connect to the clients WAN. This will connect it to other 3300ICP on the Network. I am not sure how to set up the routing table to forward the ICP ip adress. The gateway would be 142.28.221.161. There will be dhcp servers on both Vlan 100 and Vlan 200 so I can't just put them together. Any help would be apreaciated

Bob

 

[BAsh12]

Just add a route, simple.

AS long as your subnets are different. /24, you will have no problem.

More info required.