Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hows do I get text to flash when ru
- Thread starter nishet
- Start date
You can change the colors by issuing "color <back fore>" such as "Color 07" which means black background/white foreground. I don't think, however, there is a way in NT to make it flash.
These are the color numbers:
0 = Black 8 = Gray
1 = Blue 9 = Light Blue
2 = Green A = Light Green
3 = Aqua B = Light Aqua
4 = Red C = Light Red
5 = Purple D = Light Purple
6 = Yellow E = Light Yellow
7 = White F = Bright White
Wish I could be more help...
- Bill
"You can get anything you want out of life, if you'll just help enough other people get what they want" - Zig Ziglar
These are the color numbers:
0 = Black 8 = Gray
1 = Blue 9 = Light Blue
2 = Green A = Light Green
3 = Aqua B = Light Aqua
4 = Red C = Light Red
5 = Purple D = Light Purple
6 = Yellow E = Light Yellow
7 = White F = Bright White
Wish I could be more help...
- Bill"You can get anything you want out of life, if you'll just help enough other people get what they want" - Zig Ziglar
QaptainQwerty
MIS
The link below talks about using ANSI codes to do some interesting stuff, including Blink, which maybe Flash for you. Check it out. I know I used to make these codes to work in DOS and Windows 95 DOS but not sure about NT.
- Status
Similar threads
- Locked
- Question