Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to view the list of directories in a USB stick 1

Status
Not open for further replies.

LittleMaster

Technical User
Sep 16, 2015
182
PK
While logged in into the PDT, how can I print a list of all directories in a USB STICK which is inserted in CP PIV module of meridian 61C .. actually I want to refresh the patches ,writing command line like ...
.mdp install .....
Here after mdp install it asks for the path of zip patch file..how to write the path...
.mdp install <path>...

thanks
 
The patch zip file needs to be put in the root location on the USB stick.

A typical command to use would be something like this taken from an old guide of mine

Login into the Call Server as Normal & go into LD 143 to start the patching procedure. The latest “PEP’s” will need to be put onto a PCMCIA card for a Option 11 type system, or a floppy disk / CD-Rom on the larger Call Servers. The files should be in the “Zip” format as supplied by Nortel.
All items shown in bold are important when referring to this document & usually the use of the “Enter” key will be required at the end. The example shown is from a Cabinet Call Server system.
This method is not supported for Call Server (Succession) V03.00 software. Lower or Upper case commands can be used in LD 143 & it takes about 90 seconds to run the program via Pcmcia.
The larger platforms that use the Floppy disk method will take around 5 minutes to install the patches.

>ld 143

.mdp refresh a:ssc04_8.zip (This is the Chassis / Cabinet command) (a: = Slot “A” Pcmcia Card)
.mdp refresh f0/cpp04_8.zip (This is the Half, Single or Multi Group command) (f0 = Floppy Dr)
.mdp refresh f0/cpt04_8.zip (This is the Half, Single or Multi Group command) (f0 = Floppy Dr)
.mdp refresh cf2/pp445_1.zip (Pentium 4 Half, Single or Multi Group command) (cf2 = Flash Crd)

To list the contents from a removeable media device, you will probably need to go into "pdt" and the commands will be something like this

pdt> cd cf2:
pdt> ll

Directory of 'cf2:':

SIZE DATE TIME NAME
---------- ----------- -------- ------------
32 Sep-08-2016 02:06:57 . <DIR>
1024 Jan-01-2096 08:55:00 direct.rec
27746 Jan-01-2096 08:55:44 disk.sys
661 Jan-01-2096 08:56:34 diskoscc.sym




Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer

Very advance high level knowledge on the Linux BCM phone system.

Website
 
Bundle of thanks...Firebirdscrambler
Your posts are always great and helpful
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top