How to use features on a 2211 WLAN handset?

[corsyl]

We have a site running a BCM50 R2.0 with WLAN 2211 handsets.

On a digital or IP set people can use feature 0 to use speed dial.

How can this be done at a 2211 handset? Maybe I overlook it but I can't find the use of features

Thanks in advance for any help.

 

[Dasheen]

Use Speed Call
By entering a one-, two-, or three-digit code (0–999), use the Speed Call feature to
store, edit, and automatically dial frequently called telephone numbers.

To store a Speed Call number:
1. Go off-hook.
+
2. Press the Function key and the number
3 key to enter the active (idle) state.
3. Press the Line key to access the Feature
Keys menu.
4. Press the number key (1 through 6)
corresponding to the
Speed Call Controller feature.
Note: The triangular icon flashes,
indicating programming mode.
5. At the prompt:
a. Enter a one-, two-, or three-digit
code (0-999) and the telephone
number. This number can be
internal, external, or long distance.
b. If required, dial the access code.


Press the number key (1 through 6)
corresponding to the
Speed Call Controller feature again to
save the code and number.
Note: The flashing icon turns off.

To make a Speed Call:
1. Go off-hook.
2. Press the Line key to access the Feature
Keys menu.
3. Press the number key (1 through 6)
corresponding to the
Speed Call Controller feature.
4. Dial the Speed Call code to
automatically dial the number.
Make a System Speed Call

Use the System Speed Call feature to dial Speed Call codes that override all
restrictions on a call.
To make a System Speed Call:

1. Go off-hook.
2. Press the Line key to access the Feature
Keys menu.
3. Press the number key (1 through 6)
corresponding to the
Speed Call Controller User feature.
4. Dial the Speed Call code to
automatically dial the number.

 

[corsyl]

Dasheen,
thank you for your reply.
So, if I am correct, first I have to program a feature key on the handset itself before to be able to use the System speed dial?

I assumed all functionality of the BCM features where integrated into the handset.

Because there is no feature-key (the nortel logo key on a digital set) I have to program this into the handset using one of those lines, right?