Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to upload the keycode file to cs1000M SG CPPIV?

Status
Not open for further replies.

Zaktabu123

Programmer
Apr 13, 2010
22
US
All I have is below

8RFG ELEU D5JU 53YH Y87E 6N9Q UT07 6G88

Need to do it today please help
 
First use LD 22 to print the SLT for a before and after keycode entry comparison. See NN43041-458 page 373 for details.
When you enter the key codes manually, do not put spaces between each 4 grouping. For example, you should input 8RFGELEUD5JU53YHY87E6N9QUT076G88 instead of 8RFG ELEU D5JU etc. Press the return key when each line is done. Type "end" to end the process.
 
That looks like a keycode for CP rather than a PBX keycode.
 
Do you have the keycodes on a diskette?

ISM Parameter Upgrade for Large System

1. On a PC access the PBX with HyperTerminal.
2. Place keycode diskette in A: dive of PC or have Keycode.KCD file on your PC.
3. Log into PBX.
4. LD 143
5. KUPL
6. Click the Transfer menu in Hyper Terminal and select Send text File
7. From the Files of Type pull-down menu select All files (*.*)
8. Locate and select the keycode file on the PC.
9. Click Open
The keycode is displayed after the KUPL prompt.

Example KUPL 0001PBXo1o1
9FPAMSRHN17KRUQWERTYUIOPLKJHGFDSZXCVB

10. At prompt enter KDIF REC HD
11. Ensure the new keycode does not lower ISM limits or reduce features
12. Enter KNEW HD to activate new keycodes
13. LD 22
14. SLT




Thanks,

Buddy

Linked in Profile
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top