How to upgrade BSIP

[downloader101]

I'm fighting with a BSIP's. My question is on how to upgrade the software.
Is it possible that some of you guys have made an successfull upgrade to V1 R3.0.0?
Witch file do i use, the:
normalboot, PostUpdate.bat, PreUpdate.bat, RootFs_Csp, uImage_Csp or uImage_Msp
None of these file works on my BSIP, instead the "passive" system, when looking at the
Program Info shows "Update incomplete"
I have tried to factory reset, both pressing the button "Factory Setting" and also tried to do it
by doing this on/off sequence with the power cable, but none of this works, the state of the
software dos not change.
Any good advice is appriciated, thanks
/Ulrik

 

[Iamnothere]

What the heck is a BSIP?

 

[downloader101]

If you know the BS 2.2, BS 3 or the latest BS 4, You will know that i'm talking about the Dect bases on the HiPath systems.
The BSIP is the Dect base but on IP, there is more here:

http://wiki.siemens-enterprise.com/wiki/HiPath_Cordless_IP_-_IEEE_1588

On the back side it's called BSIP, but it's also called HiPath Cordless IP
Hope this is helpfull..
/Ulrik