How to upgrade a SOE to R6 1

[Bas1234]

Add the source number below in the nouser.

UNLOCK_BOOT_ROM

Then reboot the SOE and add the source number below the in the nouser.

ALLOW_SOE_R6_UPGRADE

And now you can upgrade to Release 6, no license needed.


Good luck.







check the manufactory date this should start with 04/01/XXXX

I just wanted this to share with you guys, you all know it's NOT supported and you cannot blame me for wrekking up your system.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[hairlessupportmonkey]

pure filth!

cheers BAS

Tek-Tips home page still broken!

 

[tlpeter]

Are you drunk ?


ACS IP Office
APSS IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
APSS UC
ACA - Voice Services Management


______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[hairlessupportmonkey]

Oh its working. my browser cache was still loading the dead home page.

 

[qtelcom]

Is this a joke?

 

[amriddle01]

I think it's a day early though Bas

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[Bas1234]

I just set my date on the first of april and it worked, HSM also tried it.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[qtelcom]

Yep, works now. Thanks!

 

[rmack22138]

Is this suppose to be done through the DTE port and where to you add the date.

 

[amriddle01]

You add it through the F.0.0.L interface session

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[TomMills]

lol. nice one bas. funny stuff.

http://www.twitter.com/tem1985

ACSS-SME
Get well soon Aaron.

 

[hairlessupportmonkey]

I found also the 9670G works when you unlock the SOE as well. that phone is a nice bit of kit!

 

[TomMills]

mine just went out and got me a starbucks. i love R6 SOE's

http://www.twitter.com/tem1985

ACSS-SME
Get well soon Aaron.

 

[amriddle01]

Also I have just discovered, if on the 500v2 you add the No User source number entry "UNLOCK_R7_FEATURE_SET" you get some very usefull new features such as "Emulate Current System" search feature that sniffs the network for other systems and gives you all those features plus the IP Office ones, and my particular favourite the "RTFM" function which flashes up a box upon opening Manager that asks if you have RTFM YES/NO if you click the YES button you are allowed in, if you click the NO button a page goes over all handsets and Overhead devices saying "Warning, Idiot is programming the system, please punch them in the face"

ACS - IP Office Implement

"What the Crocodile Hat....was that?