Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to translate these commands to MX-ONE 7.3 commands (from MX-ONE 5.0)?

Status
Not open for further replies.

doktor

IS-IT--Management
Dec 3, 2003
3,841
DK
How to translate these commands to MX-ONE 7.3 commands (from MX-ONE 5.0)?

Having a MX-ONE 7.3, I should use the following commands:

syedp:lim=all;
syevp:type=kl1;
syevp:type=el6;

I found out that "syedp:lim=all;" could be translated to:

resource_status --lim all --list --equipment

Can you help with the 2 others:

syevp:type=kl1;
syevp:type=el6;

Printout should not be changed from the MX-ONE 5.0 "style"

BR
Henrik


///doktor
____________________________________
 
The two printout commands gives the result, but the printout has changed from the old MX-ONE 5.o printout.

resource_status --equipment --equipment-type EL6 --vacant -l all
resource_status --equipment --equipment-type KL1 --vacant -l all

Maybe you can point me in the correct direction?

///doktor
____________________________________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top