How to Time length of DISA call

[Hitechbuzz]

Hi All
I have the need to be able to either cut off a Disa call after 10 minutes or put beeps onto it so they hang up. Any ideas.
Hitechbuzz

 

[summerdike]

Do you want to limit the time of the disa caller to another internal extension or the trunk-to-trunk call (outgoing) of a disa caller?

In the latter situation maybe Remote/mobile extension is a solution.
The generic (the basis for Remote/mobile ext.) and analog extensions in BC12 can be limited for the use of cost (parameter MCOST).


______________________________
"Reload and Restart Requested
System Initiated"

 

[Hitechbuzz]

Thanks Summerdike
We are about to go to BC12 middle of next month so more info would be good
To see is to know to know is to see.

 

[summerdike]

Remote /mobile etxtension in BC12:

Remote/mobile extension is a license controled function whith two functions:
1.The caller calling a mobile/fixed remote etxension (generic extension connected to an external destionation) will be redirected to the external destionation (like ext. follw me).
2.The external destination can make use of MD facilities (make call, call operator, *21 etc)as if it was an internal extension.

The difference between remote and mobile extension:
Remote extension: 1 external destination connected/programmed for 1 internal number.
Mobile ext: more than 1 external destination can be programmed for 1 internal generic number.

commands (BC12):
gedii:dir=4001,lim=3,csp=4,mcost=6;
(Mcost limits the use of the extension for the duration of a call on a per call basis in pulses (you need pulses on the isdn line))


reexi:dir=4001,remnum=00622987654,type=fix;
(type=fix or type=mob. remnum is the external/public number)

nutri:cnvtyp=6,entry=00622987654,trc=11,pre=4001;

Optional:
pelpi:dir=4001 etc.
niini:dir=4001 etc.


______________________________
"Reload and Restart Requested
System Initiated"

 

[Hitechbuzz]

Thanks Summerdike
most times it would be Trunk to Trunk calls as we allow certain staff to call in on the Disa number and then call a speed dial number which is = to another staff cellphone however some people abuse the system and stay on for far to long. So we wanted to cut them off after 8 minutes.
The other thing is that someone could call an extension be answered by a friend who then transfers the call to an outside number again I would like to give those calls the chop after 8 mins. We have a 2meg fiber link for our incomming calls and do not get meter pulses. Ideas please
To see is to know to know is to see.
Cheers