Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to take control of win2k pro pc from XP Pro? 3

Status
Not open for further replies.

bmtn

MIS
May 27, 2003
21
US
Hi,

I've a XP pro machine and a win2k machine on a mini network. Please provide instructions on how to take control of the win2k machine (SP4)from the XP Pro machine (SP2)?

Thanks,

Kevin
 
By "Take control" do you mean that you want to use some sort of remote control software on the XP machine to operate the Win2K machine?

If this is the case, then unless you are able to get some proper network management software, I'd install the VNC server on the 2K machine and set it to run and the client on the XP machine.
You can then use VNC on XP to connect to the 2K box.

For the other way around, just use remote desktop.

John
 
John,

That is exactly what I want to do, use remote control software on the xp machine to operate the win2k machine. I've heard of vnc server but never use it before; is it easy to use? and does it allow me fully operation control of my win2k machine?

By the way, on the win2k machine I would use server and on the XP I'd use client of VNC?

Thanks,

Kevin
 
Yes, VNC is easy to use. It gives you as much control over the computer as though you were sat directly in front of it.
There are several distributions of the VNC server and client available, so I'd guess you can pick one and try it.
You should be able to install it as a service on the Win2K box to run regardless of whoever is logged on.

John
 
John,

Thanks for the info. Have you use Ultra VNC before? what distributions of VNC server is good to use?

Thanks

Kevin
 
I've not used Ultra VNC at all. The systems that were running NT 4 are now using Windows 2000 or 2003 so I use terminal services in remote administration mode, so have no need for it at present, as this was its main use.
I'd guess that provided you stick to one particular type, it will be alright.

John
 
bmtn,
I currently use NetMeeting (conf.exe) which is supplied with(for) all versions of Windows including XP going back to 95 for remote desktopping (except when between two XP machines when I use XP remote desktop)

jrbarnett,
What is VNC server and is it better than NetMeeting?
How does one install it/ enable it on Windows 2000, and XP.

regards Hugh

 
What is VNC?

The VNC server is the system that runs on the host (ie the system that you connect to) that provides connectivity for the client application.

How does one install it on Windows 2000/XP? Same as any other application - download it and run setup, enter a password for connection and that's it. You may need to change a few preferences to get it to work as you wish, but apart from that there's nothing much to it.

In the client, enter the IP or DNS name of the host to connect to, enter the host password when prompted and voila.

John
 
Thank you all for all the useful informations. I really appreciated.

Kevin
 
xwb,

Does RDP allow xp pro pc connect to win2k pc? win2k machine will be the host and all of xp pro pc will be able to connect to it?

Thanks,

Kevin
 
Win2K Pro doesn't have an RDP server application built in.
Win2K server does - its called Terminal services, and can be run in Terminal Services for Administration mode.
This entitles two concurrent connections via RDP for administration mode.

So bmtn, if the PC is running win2k pro (which is most likely for a desktop PC) then the answer to your question is no, a win2k pro machine can't be used as a client to an RDP session.

John
 
Dameware NT Utilites is the Best.
But if you don't have it, you may use Radmin.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top